The Main Causes of Failure in Construction Utility Anchors

Utility or ground anchors are vital for construction projects because they restrain and support buildings and slopes to prevent collapse and stabilize the structure. However, installing these components does not always go according to plan. Keep reading to learn about the main causes of failure in construction utility anchors so that you can avoid making these mistakes on your work site.

Choosing the Wrong Anchor

Not every utility anchor application will require the use of the same anchor. There are many anchors to choose from on the market, from power hub screw anchors to expanding rock anchors. For example, if you’re drilling through hard rock and need to install an anchor, your best option would be an expanding rock anchor because it offers better strength and stability for stone. Always ensure you’re selecting an anchor that is appropriate for your application.

Only Installing Half of the Anchor

One of the main causes of failure in construction utility anchors occurs when the worker installs the component halfway into the ground or concrete, leaving the other half sticking out. This could become hazardous to the operator of the auger installing the anchor. The drill rig could collapse on a worker because of the half-installed anchor, or the core drill could rotate around the drill bit, which could also cause injuries to the operator.

Not Inspecting Anchors Before Installation

A broken or damaged anchor cannot stabilize a structure to its full potential. You must inspect the tools and parts you’re working with before using them in construction, or they will fail and cause injuries or accidents. Take the time to check your anchors for bends, cracks, or holes to ensure they can support a structure.

Installing Anchors Incorrectly

Oftentimes, a utility anchor fails because the worker did not install it correctly the first time. Drop-in anchors are typically the most difficult to install and are usually installed incorrectly. To ensure an adequate application, utilize suitable tools for utility anchor installation. If you do so, you will see fewer issues.

Utility anchors are vital components in construction projects. Anchors that fail can cause serious problems or injuries for your crew and machine operators. Make sure to avoid the above mistakes to prevent an anchorage failure during your next construction project.

Written by Dianne Pajo

Dianne Pajo is a writer based out of the Chicagoland area with a passion for music, combat sports, and animals. She enjoys competing in amateur boxing and kickboxing, but in her other leisure time, you can find her performing music around the city. She is also a dog mom of 2.

Leave a Reply

Your email address will not be published. Required fields are marked *

Elements You Should Look For In An ERP For The Apparel Industry

Tips and Tricks To Get Your Cosmetic Business off the Ground

Tips and Tricks To Get Your Cosmetic Business off the Ground